Deprecated: Required parameter $cat_id follows optional parameter $type in /www/wwwroot/ebimall.com/systems/hong.php on line 2088

Deprecated: Required parameter $where follows optional parameter $tree_id in /www/wwwroot/ebimall.com/systems/hlb.php on line 3505
Making Metaphase Spread188bio精品生物—专注于实验室精品爆款的电商平台 - 蚂蚁淘旗下精选188款生物医学科研用品
您好,欢迎您进入188进口试剂采购网网站! 服务热线:4000-520-616
蚂蚁淘商城 | 现货促销 | 科研狗 | 生物在线

Making Metaphase Spread

Materials:

Colcemid (GIBCO: cat #: 15210-040)Hypotonic solution (pre-warmed 37C): 1:1 0.4% KCl + 0.4% Sodium citrateFixative: 3:1 MeOH + Acetic acid (e.g., 15 mL MeOH + 5 mL Acetic acid)Pasteur transpipet

Procedure:

Grow and harvest cells:

  1. Grow cells to 85% confluence
  2. Add colcemid to cell culture at 10 µl/mL
  3. Incubate for 2 hours (depends on cell cycle: longer cycle = longer treatment; H9 = 30 min.)
  4. Remove and collect growth medium and rinse cells with Hank’s or PBS
  5. Add 2 mL trypsin and reincubate the cells at 37ºC, 5-7 min
  6. Re-add the collected medium from step 4 to stop the trypsin and resuspend cells
  7. Centrifuge the cells down at 1000 RMP, 6 min
  8. Aspirate the medium but leave small amount of fluid
  9. Flick the tube with finger to fully resuspend the cells

Addition of hypotonic solution:

  1. Add 5 drops of pre-warmed hypotonic solution slowly against the side of the tube
  2. Flick the tube with fingers until 1 mL had been added
  3. Bring the volume to about 2 mL with hypotonic solution
  4. Incubate at 37ºC, 7min
  5. Centrifuge the cells down at 1000 RMP, 6 min
  6. Aspirate the medium but leave small amount to resuspend the cells

Fixation:

  1. Add 5 drops of fixative slowly against the side of the tube
  2. Bring the volume to 2 mL with fixative, can vortex if see clumps
  3. “Reverse bubble” to fully mix the cells
  4. Fix the cells at RT, 30 min
  5. Centrifuge, aspirate, and resuspend with finger as before
  6. Remove the clumps (if any) by vacuum from the side of tube
  7. Add fixative to 2 mL
  8. “Reverse bubble” and let stand at RT, 20 min
  9. Centrifuge, aspirate, and resuspend with finger as before
  10. Add fixative to 2 mL
  11. Cells are now ready to be dropped

Slide prepration (optional):

  1. Rinse slide with ice-cold water
  2. Rinse slide with fixative
  3. Drop cells flat on slide (optimal humidity: 50%-60%)
  4. Flood slide with fixative
  5. Dry slide on wet paper towels

Drop the cells onto pre-cleaned slide or treated slide above, rinse with fixative (optional), dry on wet tower papers, and observe for metaphase spreads with a phase-constrast microscope.


新闻动态
行业前沿
技术文章
最新产品

188进口试剂采购网 www.188bio.cn -中国试剂网,试剂网,化学试剂网,国药试剂,抗体公司,试剂公司,试剂盒公司,苏州试剂公司,北京化学试剂公司,天津化学试剂,试剂商城,试剂代理,流式抗体 细胞库查询 sitemap