Deprecated: Required parameter $cat_id follows optional parameter $type in /www/wwwroot/ebimall.com/systems/hong.php on line 2088

Deprecated: Required parameter $where follows optional parameter $tree_id in /www/wwwroot/ebimall.com/systems/hlb.php on line 3505
Ossila/Insulator Deposition Masks - High-Density OFETs/No Spacer Layer/E3310188bio精品生物—专注于实验室精品爆款的电商平台 - 蚂蚁淘旗下精选188款生物医学科研用品
您好,欢迎您进入188进口试剂采购网网站! 服务热线:4000-520-616
蚂蚁淘商城 | 现货促销 | 科研狗 | 生物在线
产品资料

Ossila/Insulator Deposition Masks - High-Density OFETs/No Spacer Layer/E3310

A mask for deposition of the insulator layer; for use with Ossila's high density OFET system.

Outer dimensions: 75 mm x 75 mm

Number of OFETs: 20 per substrate.

Mask with direct contact (no spacer): For sputtering and other non-directional deposition systems, as well as for thermal deposition systems with oblique angles or a very short throw, we recommend the use of the direct contact mask to get well-defined edges.

Mask with 200 μm spacer: For normal thermal evaporation systems we recommend the use of masks with the 200 μm spacer to help avoid scratches and allow better out-gassing.

 

Datasheet

High density twelve substrate evaporation stack (technical drawing)
Insulator Mask for High Density OFET system (technical drawing).

 

High density twelve substrate evaporation stack (dimensions)
Insulator Mask for High Density OFET system (substrate dimensions).

 

To the best of our knowledge, the technical information provided here is accurate. However, Ossila assume no liability for the accuracy of this information. The values provided here are typical at the time of manufacture and may vary over time and from batch to batch.

新闻动态
行业前沿
技术文章
最新产品